High quality welded wire mesh panels, mesh products and wire products
Welded mesh panels of different sizes are manufactured to order. The below tables show industrial welded meshes generally available in rolls and usually in stock.
Welded wire mesh panel is made of high quality welded wire mesh, with flat even surface, firm structure. It is extensively used in building, food, agriculture and so on.
Wires are welded by electrical welding process known as spot welding. We manufacture panels down to 25x25mm aperture. Smaller welded mesh products need to be imported.
Mesh can be treated after manufacture. Passivation involves using a chemical bath. However, unlike electropolishing, passivation does not involve the use of electrical currents to strip the top layer of material.
Passivation is primarily used to remove contaminants from the surface of stainless steel. Such contaminants are usually accrued during the manufacturing process.
Passivation is not necessary to form the oxide layer that protects stainless steel, but specific passivation treatments may thicken or change the composition of stainless steel’s protective oxide layer.
Standard galvanized welded mesh
Some industrial wire mesh products are mass produced and generally available.
Roll diameters available are 915mm, 1220mm, 1830mm and 2440mm.
Wire mesh, fully galvanized before welding.
Also available is mesh galvanized after welding.
Flush cut mesh sheets/panels.
Standard sheet size is 2.4m x 1.2m
Specimesh is a highly versatile, inexpensive alternative precision mesh product available in black steel.