Aquaponics & Hydroponics Equipment

Hydroponics and aquaponics equipment and testing equipment

Filtration and pumping are critical considerations. Contact us for suitable equipment.

Water quality

Water quality testing is an essential component of hydroponics and aquaponics management. We supply cost effective tools for all important water quality parameters.

Tools for water quality management.

eXact Eco-Check Water Test Kit follow link

pH, conductivity, TDS for aquaculture, hydroponics, aquaponics

Waterproof tester/meter for pH, mV, conductivity, TDS (total dissolved solids) and temperature.



Test kits for hydroponics and aquaponics

Hydroponics test kit

The hydroponics kit tests for pH and three key nutrient factors: nitrogen, phosphorus and  potassium. It allows the hydroponic hobbyist to maintain proper nutrient balance and to achieve optimum growing conditions in soil-less  cultures. Reagents sufficient for 50 tests per factor and complete  labware are foam-mounted in a sturdy carrying case. Instructions and  75-page hydroponics handbook are supplied.


Hydroponics 4-Way Test Kit

Item Description

Order Code


Hydroponics 4-in-1 Test Kit Model HP-1


HF (7)

Reagent Refill


HF (3)

Octa-Slide Comparator Tests


pH 4.5-8.0

Nitrate Nitrogen

5-200 ppm*


3-30 ppm


0-200 ppm

Direct Reading Turbidity Tube


0-250 ppm

*By dilution

Aquaponics kits

Aquaponics  water quality management equipment options

In an aquaponic setting, total nitrate is added to the list of general water chemistry parameters that are monitored most frequently in aquaculture applications. Plants in these systems are often limited in iron, calcium and potassium.

So parameters to measure:

  • Water temperature (ºF or ºC) (meter)
  • Dissolved oxygen (D.O.) (meter)
  • pH  (meter, test strip)
  • Total Ammonia-Nitrogen or TAN (test strip, kits)
  • Total Nitrite
  • Total Nitrate
  • Potassium
  • Calcium
  • Iron

The range of testing and meter options ranges from test strips to professional meters.

Oxygen (dissolved oxygen (DO)) is best measure with an oxygen meter. There are however chemical methods for reading DO.

Selected kits with a Range/sensitivity of 0.2, 0.4, 0.6, 1.0 ppm NO3-N; 0.2, 0.4, 0.6, 1.0 ppm PO43- are suitable for aquaponics. The same applies to the ammonia and nitrite levels that are suited to aquaculture applications.

pH and EC Monitor



Measuring Range:

PH: 0.00-14.00 pH
EC: 0-19.99 ms/cm


PH: +/- 0.1 pH
EC: +/- 0.01 ms/cm

Operating Temperature: 0°C – 50°C
Temperature Compensation: 0°C -50°C
Power Supply: DC 6 V
Dimensions: 110mm x 51mm x 22mm
Weight: 200g (Excluding packaging)

Multi-meter water monitor


Multiparameter meter for water quality testing and monotoring. Measures siz water quality parameters – pH°CORP (mV), EC (uS), CF and TDS (ppm). The 6 in 1 water monitor is a user friendly monitor which can be used  in aquariums, pools and for hydroponic purposes. The unit can be run via a re-chargeable battery or by power supply. (If run via 220v ensure to  ground the reservoir). The Screen is back-lit making it easy to read.


  • Wall brackets/suckers/velcro for easy installation
  • one small screwdriver

Carbon dioxide control

Modern farming systems often require carbon dioxide (CO2) supplementation. We supply flowmeter regulators and solenoid valves for this application. These commect to the CO2 cylinder and allow flow control between 1 and 25 lpm. Suitable for growrooms, green houses, aquariums, algae production and hydroponics.


Grow beds

See the different grow beds available.